Skip to product information
1 of 1

SKU:Z306PS

CRL

CRL Polished Stainless Z-Series Round Type 2" Radius Base Stainless Steel Clamp - Z306PS

CRL Polished Stainless Z-Series Round Type 2" Radius Base Stainless Steel Clamp - Z306PS

Regular price $29.00 USD
Regular price Sale price $29.00 USD
Sale Sold out

Our CRL Z-Series Round Type Radius Base Glass Clamps are designed to be used on glass thickness of 1/4" to 1/2" (6 to 12 mm), and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions, railings, windbreaks and countless other projects. For securing the Z-Clamp to thin wall tubing (less than 1/8”), use CRL’s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32” (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16” Mandrel and Nosepiece. NOTE: 1/2" (12 mm) notch is required using the steel pin (included with the clamp) for additional glass support. Replacement gaskets are available by ordering CRL Cat. No. Z14RG.

Product Warning:
For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

For 1/4" and 5/16" (6 and 8 mm) Glass | Use on Mezzanines, Partitions, Railings and Windbreaks | Use Monolithic Tempered Glass | Steel Pin Available for Additional Glass Support | Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)

View full details