Skip to product information
1 of 1

SKU:Z606W

CRL

CRL White Z-Series Square Type Radius Base Zinc Clamp [1/4" and 5/16" Glass] - Z606W

CRL White Z-Series Square Type Radius Base Zinc Clamp [1/4" and 5/16" Glass] - Z606W

Regular price $16.10 USD
Regular price Sale price $16.10 USD
Sale Sold out

This CRL Z-Series Round Type Flat Base Glass Clamp is designed to be used on glass thickness of 1/2" (12 mm) Glass. Constructed from either zinc or stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects. For securing the Z-Clamp to thin wall tubing (less than 1/8”), use CRL’s ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32” (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16” Mandrel and Nosepiece. NOTE: 1/2" (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support.

Product Warning:
For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

For 1/4" and 5/16" (6 and 8 mm) Glass | Replacement Gaskets are Available by Ordering Cat. No. Z12RG | For Use on Mezzanines, Partitions, Railings and Windbreaks | Use Monolithic Tempered Glass | Steel Pin Available for Additional Glass Support

View full details