CRL Brushed Stainless Finish Curved Top Door Patch Fitting with INT304 Insert - CPF20BBS
Couldn't load pickup availability
Product Overview
The CRL Curved Top Door Patch Fitting includes the 1NT304 Insert for use with our Overhead Concealed Door Closers that have a 9/16" (14 mm) square and 3/4" (19 mm) long spindle. Gaskets are supplied that allow this Patch Fitting to be used with either 3/8" or 1/2" (10 or 12 mm) Glass.
GLASS FABRICATION REQUIRED:
One 3/4" (19 mm) Diameter
Hole and Corner Notch
COMES WITH:
Template and Instructions
IMPORTANT NOTE: Door Closer needs to be adjusted back 1/16" (1.6 mm) to achieve 2-11/16" (68 mm) pivot setback to work with this patch fitting.
Product Warning: These fittings are not for use with Laminated Glass.
The following guidelines are to be used when making a door using this hardware:
MAXIMUM HEIGHT: 102" (2591MM)
MAXIMUM WEIGHT: 194 LBS (88KG)
MAXIMUM WIDTH: 42" (1092MM)
If the door exceeds any of these limitations, full door rails should be used.
- 2-11/16" (68 mm) Pivot Setback
- For 3/8" or 1/2" (10 or 12 mm) Glass
- Use Monolithic Tempered Glass