DORMAKABA Bottom Patch Fittings are used with out bottom door pivots or floor closers. It fits in the lower corner of the glass panel, and requires a hole and cut-out in the glass. Available in brushed or polished stainless steel finishes.
The following guidelines are to be used when making a door using this hardware:
Maximum Height: 102" (2.59 m) Maximum Weight: 194 Lbs. (88 kg) Maximum Width: 42" (1.09 m)
If the door exceeds any of these limitations, full door rails should be used.
Glass Fabrication Required: One 3/4" (19 mm) Diameter Hole and Corner Notch
Product Warning: These fittings are not for use with laminated glass.
2-3/4" (10 mm) Pivot Setback | For 3/4" (19 mm) Glass | Use Monolithic Tempered Glass
